T O P I C R E V I E W |
prwlyn | I finally bought the parts needed to do the TSB on slow gas filling on the 99-00 model. I'd like to find out if anyone, who did it yourself, needed any special tool or tools to complete the job before I tear it apart. TIA I'll be taking pictures of the process incase someone else does it themselves also. ------------------ Fred J. Henkel "Prowler is the Lord Of The Looks" http://www.lordofthelooks.com
|
ed monahan | Fred, what parts are involved? I thought they just replaced the rubber filler hose near the top, but I never checked into it since it was done under warranty. Hopefully it will not be too technical. Good luck. |
toys | OOPS Toys This message has been edited by toys on 03-05-2007 at 08:31 AM |
prwlyn | Ed, your correct but I haven't look at it yet and I thought I'd check now and not find out later that one tool I don't have is needed. The parts are a new "neck" and the filler hose that connects it to the tank. I'm thinking it only may take a screw driver but I'd like to be sure. ------------------ Fred J. Henkel "Prowler is the Lord Of The Looks" http://www.lordofthelooks.com
|
ed monahan | Fred, I don't know the answer. I was still under warranty and they fixed it (about 95 % or so). I still had a problem once in awhile. |
TFischer | Fred: I think the special tool you're thinking about was for the gasket on the top of the tank, but I could be wrong. T This message has been edited by TFischer on 03-05-2007 at 12:47 PM |
prwlyn | Well I'm filling up just fine now, what a difference at the pump. I have posted a step by step with pictures on my website. Here Hope it helps someone else with this problem. ------------------ Fred J. Henkel "Prowler is the Lord Of The Looks" http://www.lordofthelooks.com
This message has been edited by prwlyn on 03-06-2007 at 06:37 PM |
Steve Conley | Tools needed to change filler & neck 1. jack 2.jack stand 3.lug wrench 4. Phillips screwdriver 5. 1/4 nut driver 6. droplight. This was all I needed when I did mine. |
1buddyc | Excellent instructions Fred, I'm "Saving" them to my Prowler How to file. I've had the kit for a year and never got around to replacing the parts, YET. Guess I'll call Alley Cat and see if he can come over to help me remove my rear wheels....lol Thanks, Buddy. |
David Veu Casovic | |
prwlyn | By the way, if you have the BIG Prowler Shop Manual this is all laid out in Section 14, pages 20 - 21. ------------------ Fred J. Henkel "Prowler is the Lord Of The Looks" http://www.lordofthelooks.com
|
Gunsmoke | Does anyone have the pictures and procedures for the fuel neck and tube update? I tried clicking on the link posted but comes back “server not found” |
ed monahan | Fred passed away about 10 years ago so that site is lost forever. |
FormerDodgeGuy |
|